Lulzsec hacked Sony Computer Entertainment Developer Network and leaked source code

Lulzsec hacked Sony Computer Entertainment Developer Network  and leaked  source code

hats off to the Lulz security. They again hit sony network and relesed the source code of Sony Computer Entertainment Developer Network "scedev.net" Via there Twitter account. They share this data using a mediashare link


Download Here
http://www.mediafire.com/?ev1zo010c020764

Lulzsec hacked Sony Computer Entertainment Developer Network and leaked source code

Lulzsec hacked Sony Computer Entertainment Developer Network  and leaked  source code

hats off to the Lulz security. They again hit sony network and relesed the source code of Sony Computer Entertainment Developer Network "scedev.net" Via there Twitter account. They share this data using a mediashare link


Download Here
http://www.mediafire.com/?ev1zo010c020764

download Mousezahn - Open source free fast traffic generator and packet crafter tool

Mausezahn is a free fast traffic generator written in C which allows you to send nearly every possible and impossible packet. It is mainly used to test VoIP or multicast networks but also for security audits to check whether your systems are hardened enough for specific attacks.


Mausezahn can be used for example:

• As traffic generator (e. g. to stress multicast networks)
• To precisely measure jitter (delay variations) between two hosts (e. g. for VoIP-SLA verification)
• As didactical tool during a datacom lecture or for lab exercises
• For penetration testing of firewalls and IDS
• For DoS attacks on networks (for audit purposes of course)
• To find bugs in network software or appliances
• For reconnaissance attacks using ping sweeps and port scans
• To test network behaviour under strange circumstances (stress test, malformed packets, ...)

...and more. Mausezahn is basically a versatile packet creation tool on the command line with a simple syntax and context help. It could also be used within (bash-) scripts to perform combination of tests. By the way, Mausezahn is quite fast; when started on my old PIII-Laptop (1.4 GHz, Gigabit Ethernet) I measured 755 Mbit/s using the interface packet counters of an HP ProCurve 5400 switch.


Currently Mausezahn is only available for Linux platforms. Please do NOT PORT Mausezahn to Windows!




As of version 0.38, Mausezahn supports the following protocols:

• ARP
• BPDU or PVST
• CDP
• LLDP
• IP
• IGMP
• UDP
• TCP (stateless)
• ICMP (partly)
• DNS
• RTP optionally RX-mode for jitter measurements
• Syslog

Read More
http://www.perihel.at/sec/mz/


download Here
http://www.perihel.at/sec/mz/mz-0.40.tar.gz

download Mousezahn - Open source free fast traffic generator and packet crafter tool

Mausezahn is a free fast traffic generator written in C which allows you to send nearly every possible and impossible packet. It is mainly used to test VoIP or multicast networks but also for security audits to check whether your systems are hardened enough for specific attacks.


Mausezahn can be used for example:

• As traffic generator (e. g. to stress multicast networks)
• To precisely measure jitter (delay variations) between two hosts (e. g. for VoIP-SLA verification)
• As didactical tool during a datacom lecture or for lab exercises
• For penetration testing of firewalls and IDS
• For DoS attacks on networks (for audit purposes of course)
• To find bugs in network software or appliances
• For reconnaissance attacks using ping sweeps and port scans
• To test network behaviour under strange circumstances (stress test, malformed packets, ...)

...and more. Mausezahn is basically a versatile packet creation tool on the command line with a simple syntax and context help. It could also be used within (bash-) scripts to perform combination of tests. By the way, Mausezahn is quite fast; when started on my old PIII-Laptop (1.4 GHz, Gigabit Ethernet) I measured 755 Mbit/s using the interface packet counters of an HP ProCurve 5400 switch.


Currently Mausezahn is only available for Linux platforms. Please do NOT PORT Mausezahn to Windows!




As of version 0.38, Mausezahn supports the following protocols:

• ARP
• BPDU or PVST
• CDP
• LLDP
• IP
• IGMP
• UDP
• TCP (stateless)
• ICMP (partly)
• DNS
• RTP optionally RX-mode for jitter measurements
• Syslog

Read More
http://www.perihel.at/sec/mz/


download Here
http://www.perihel.at/sec/mz/mz-0.40.tar.gz

THC Hydra v.6.4 released | network logon cracker

THC Hydra v.6.4 released | network logon cracker

If you want to crack password of various networking protocols to access remote logon, Hydra is the best tool for that. Hydra is a parallized login cracker which supports numerous protocols to attack. New modules are easy to add, beside that, it is flexible and very fast. Version 6 was tested to compile cleanly on Linux, windows/Cygwin, Solaris 11, FreeBSD 8.1 and OSX.


Currently this tool supports:
TELNET, FTP, HTTP, HTTPS, HTTP-PROXY, SMB, SMBNT, MS-SQL, MYSQL, REXEC, RSH, RLOGIN, CVS, SNMP, SMTP-AUTH, SOCKS5, VNC, POP3, IMAP, NNTP, PCNFS, ICQ, SAP/R3, LDAP2, LDAP3, Postgres, Teamspeak, Cisco auth, Cisco enable, AFP, Subversion/SVN, Firebird, LDAP2, Cisco AAA (incorporated in telnet module). For HTTP, POP3, IMAP and SMTP, several login mechanisms like plain and MD5 digest are supported.


This tool is a proof of concept code, to give researchers and security consultants the possiblity to show how easy it would be to gain unauthorized access from remote to a system.


Disclaimer
1. This tool is for legal purposes only!
2. The GPLv3 applies to this code.
3. A special license expansion for OpenSSL is included which is required for the debian people


Changelog:

•  Update SIP module to extract and use external IP addr return from server error to bypass NAT
•  Update SIP module to use SASL lib
•  Update email modules to check clear mode when TLS mode failed
•  Update Oracle Listener module to work with Oracle DB 9.2
•  Update LDAP module to support Windows 2008 active directory simple auth
•  Fix to the connection adaptation engine which would loose planned attempts
•  Fix make script for CentOS, reported by ya0wei
•  Print error when a service limits connections and few pairs have to be tested
•  Improved Mysql module to only init/close when needed
•  Added patch from the FreeBSD maintainers
•  Module usage help does not need a target to be specified anymore
•  configure script now honors /etc/ld.so.conf.d/ directory 

Download Here

http://www.thc.org/releases/hydra-6.4-src.tar.gz

THC Hydra v.6.4 released | network logon cracker

THC Hydra v.6.4 released | network logon cracker

If you want to crack password of various networking protocols to access remote logon, Hydra is the best tool for that. Hydra is a parallized login cracker which supports numerous protocols to attack. New modules are easy to add, beside that, it is flexible and very fast. Version 6 was tested to compile cleanly on Linux, windows/Cygwin, Solaris 11, FreeBSD 8.1 and OSX.


Currently this tool supports:
TELNET, FTP, HTTP, HTTPS, HTTP-PROXY, SMB, SMBNT, MS-SQL, MYSQL, REXEC, RSH, RLOGIN, CVS, SNMP, SMTP-AUTH, SOCKS5, VNC, POP3, IMAP, NNTP, PCNFS, ICQ, SAP/R3, LDAP2, LDAP3, Postgres, Teamspeak, Cisco auth, Cisco enable, AFP, Subversion/SVN, Firebird, LDAP2, Cisco AAA (incorporated in telnet module). For HTTP, POP3, IMAP and SMTP, several login mechanisms like plain and MD5 digest are supported.


This tool is a proof of concept code, to give researchers and security consultants the possiblity to show how easy it would be to gain unauthorized access from remote to a system.


Disclaimer
1. This tool is for legal purposes only!
2. The GPLv3 applies to this code.
3. A special license expansion for OpenSSL is included which is required for the debian people


Changelog:

•  Update SIP module to extract and use external IP addr return from server error to bypass NAT
•  Update SIP module to use SASL lib
•  Update email modules to check clear mode when TLS mode failed
•  Update Oracle Listener module to work with Oracle DB 9.2
•  Update LDAP module to support Windows 2008 active directory simple auth
•  Fix to the connection adaptation engine which would loose planned attempts
•  Fix make script for CentOS, reported by ya0wei
•  Print error when a service limits connections and few pairs have to be tested
•  Improved Mysql module to only init/close when needed
•  Added patch from the FreeBSD maintainers
•  Module usage help does not need a target to be specified anymore
•  configure script now honors /etc/ld.so.conf.d/ directory 

Download Here

http://www.thc.org/releases/hydra-6.4-src.tar.gz